This 810nm alma soprano ICE 12 bars laser head module with black side plate & right-angled electrode.It is used for Alma Soprano ICE hand piece repairing and replacement.
| Repair Method | Repair Program |
| A | Send the old broken handpiece to our facatory. We will do the process of checking , repairing, cleanning and etc. Then send the fresh new handpiece back to you. |
| B | if you have basic assambly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack. |
| C | If you are a professional laser service company, you have professional technology and experience.Measure your stack and comfrim the water pipe hole and screw hole position. We can customize the diode laser stack for you. |
Alma Soprano ICE Stack Specifications
| Application | 810nm Alma Soprano ICE Handpiece Repair / Replacement |
| Operation Mode | CW |
| Power per submounts | 100W |
| Number of submounts in one stack | 12bars |
| Central wavelength at 25℃ | 810 ± 2nm |
| Typical Operation current | 60A |
| Maximum Operating current | 90A |
| Typical Threshold current | 15A |
| Maximum Operating Voltage | <24V |
| Fast Axis Divergence (FWHM) | 39º |
| Slow Axis Divergence (FWHM) | 8º |
| Operation Condition | non-condemsing atmosphere, cleaning room |
| Expected lifetime | 10000hours |
| Typical pitch per bar | 1.8mm |
| Cooling requirement | |
| Flow rate | 3.6L/min +-10% |
| Water Temperature | 25+-3°C |
| Water Quality | Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm |
| Cooling system | Do not use any material that combination with copper would form galvanic elements |
If you have basic assambly capacity,We have enough technology and experience to customize the mechanical parts size,dimensions ,optional output power and wavelength of the laser head.
we have designed the structural parts of this laser stack and got good feedback on the market.
